[HOME]   [Stock List]   [Salesman]   [Technical Index]   

GLASROPE HEATERS:   [Foil]   [Special Glasropes]   [Tubular Sheathed Glasrope]

HEATERS FOR EVERY APPLICATION
                                                                                                                                PHONE: (978) 777-0070

Glasrope Heaters:  Single and Double

U.L. Recognized  -  No.  E48358           C.S.A. Certified  - No. 016386-0-000

Applications
Pipes, Tubes, and other similar apparatus where spot or particular locations need to be warmed.
Odd shapes such as:  Laboratory Beakers, Valves, and Piping, Appliances, Drier Units for Blueprint
Machines, Incubators, and Tracers for Pipe Lines.

Features  (Single Glasrope)

• The Hotwatt Single Glasrope Heater has a termination on each end.
• The nominal diameter is .165" x .032" wall for 120 volts, and .180" x .040" wall for 240 volts.
• Lengths to 300".
• Maximum temperature is 900° F.
• Made in U.S.A.

Construction   

1. Flexible woven fiberglass braid.
2. Premium grade resistance wire element.
3. Braid retainer.
4. Fiberglass insulated leads.

Unit lengths between and longer than those listed may be ordered.

Wattage
Maximum wattage is based on 5 watts per linear inch of heater.
Higher or lower wattages are available depending on the application.

Voltage
Voltage is normally 120 or 240 volts. Lower voltages are available.

How To Order
Specify:  GR16-followed by length, wattage, voltage, lead length, and special features if required.
Example:  GR16-34/150W/120V/SF1-18.

Features  (Double Glasrope)

• The Hotwatt Double Glasrope Heater has two terminations on the same end.
• Nominal diameter is .300".
• Length to 150".
• Maximum temperature is 900° F.
• Made in U.S.A.

Construction 

      

1. Single Glasrope.
2. Additional fiberglass sleeve.
3. Premium grade resistance wire element.
4. Braid Retainer.
5. Fiberglass insulated leads.

Unit lengths between and longer than those listed may be ordered.

Wattage
Maximum wattage is based on 8 watts per linear inch of heater.
Higher or lower wattages are available depending on the application.

Voltage
Voltage is normally 120 or 240 volts. Lower voltages are available.

How To Order
Specify:  GR30-followed by length, wattage, voltage, lead length, and special features if required.
Example:  GR30-65/500W/120V/SF1-6.

Special Glasropes -                   
High Temperature Glasrope:  GH16
Silicone Rubber Glasrope:  GS16
Flexible Metal Glasrope:  FM25

[HOME]   [Stock List]   [Salesman]   [Technical Index]   

GLASROPE HEATERS:   [Foil]   [Special Glasropes]   [Tubular Sheathed Glasrope]

We can be reached by e-mail at sales@hotwatt.com When ordering catalogs please include your phone number and mailing address.