[ HOME ]    [ Stock List ]    [ Stock Modifications ]    [ Salesman ]    [ Manufactured List ]    [Technical Index ]   

[ Air ]    [Band ]    [Ceramic ]     [Crankcase]    [ Foil ]    [Glasrope]    [Tubular/Tubular Immersion ]     [ Miscellaneous ] 

Cartridge:  [ Standard Cartridge ]  [ Immersion   ]  [  Metric ]  [ Square/Rectangular ]  [ Superwatt High Watt ]

Strip Heaters:    [ Strip ]    [ Ceramic Insulated Strip ]    [ Ceramic Ins.Finned Strip  ]

 
  HEATERS FOR EVERY APPLICATION
                                                                                                                                PHONE: (978) 777-0070

Strip Heaters:  Special Features

SF11: Lugs, rings, quick connect terminals attached to the end of lead wires. Specify
            terminal type and size when ordering. Special terminals are available.

• Available on:  Mica insulated strip and ceramic insulated strip and finned strip
  heaters with lead wires.

SF11A:  Ring terminals.  specify size: #6, #8, #10.

SF11B:  Straight quick connect terminals. Specify male or female and size: 3/16" or 1/4".

SF11C:  Flag quick connect terminals. Specify male or female and size: 3/16" or 1/4".

SF11D:  Spade terminals. Specify size: #6, #8, #10.

SF12:  Male dead front armored plug.

• Available on:  Mica insulated and ceramic insulated strip and finned strip
  heaters with leads.

Ground wire (SF-6) should be specified when using any 3 prong plug.
                                                     
                                                     
               
     SF12-P1:2 prong/straight blade/2 pole/2 Wire/UL&CSA Listed/
     NEMA 1-15P/125 volts/15 amps.

     SF12-P2: 2 prong/twist lock/2 pole/2 wire/UL Listed/NEMA L1-15P/
     125 volts/15 amps.

     SF12-P3: 3 prong/twist lock/2 pole/3 wire/UL&CSA Listed/
     NEMA L6-15P/250 volts/15 amps.

     SF12-P4: 3 prong/twist lock/2 pole/3 wire/UL&CSA Listed/
     NEMA L6-20/250 volts/20 amps.

     SF12-P5: 3 prong/straight blade/2 pole/3 wire/UL&CSA Listed/
     NEMA5-15P/125 volts/15 amps.

SF13:  Enclosures for protection of electrical connections.

SF13A:  General purpose box. NEMA No.1.       2 3/4"   x  1 1/2"  x  1 1/2"

• Available on:  Mica insulated strip and ceramic insulated strip and finned strip heaters.
  

XS-34:  Epoxy potting and welded ends for moisture proof applications to 265°F in potting area.

• Available on:  Ceramic insulated strip and finned strip heaters.
  

SF15:  Flexible, stainless steel conduit.

• Available on:  Mica insulated strip and ceramic insulated strip and finned strip heaters with leads.
  

SF23:  Ceramic to metal seals for hermetic sealing and vacuum applications to 1000°F.
                

• Available on:  Ceramic insulated strip and finned strip heaters with leads.
  

SF28:  Three phase heaters.

• Available on:  Mica insulated strip and ceramic insulated strip and finned strip heaters.
  

SF29:  Multiple heat; when a single unit with multiple wattages is necessary. Some uses of these
units include: quick heat-up with a standby circuit for maintenance of low temperature; providing
different wattages when there is a wide variation in thermal loads; and replacing more expensive
rheostats or powerstats for wattage control.

• Available on:  Mica insulated strip and ceramic insulated strip and finned strip heaters 1 1/2"
  wide and wider.
  

SF30:  Special wattage distribution for units requiring different concentrations of wattage over their
heated length. Specify distribution required in terms of percentage of wattage over a percentage of length.

• Available on:  Mica insulated strip and ceramic insulated strip and finned strip heaters.
  

SF37:  Stainless steel sheath.

• Standard on:  Ceramic insulated strip and finned strip heaters.
• Available on:  All mica insulated strip heaters.
• Available on:  Finned strip heaters.
  

XS86:  Ceramic terminal covers:  with Type OF or SO terminals only.

• Available on:  Mica insulated strip and ceramic insulatd strip and finned
  strip heaters 1 1/2" wide and wider.
  

XS87:  Mica heater. Mica insulation only. Unit has no metal outer sheath.

[ HOME ]    [ Stock List ]    [ Stock Modifications ]    [ Salesman ]    [ Manufactured List ]    [Technical Index ]   

[ Air ]    [Band ]    [Ceramic ]     [Crankcase]    [ Foil ]    [Glasrope]    [Tubular/Tubular Immersion ]     [ Miscellaneous ] 

Cartridge:  [ Standard Cartridge ]  [ Immersion   ]  [  Metric ]  [ Square/Rectangular ]  [ Superwatt High Watt ]

Strip Heaters:    [ Strip ]    [ Ceramic Insulated Strip ]    [ Ceramic Ins.Finned Strip  ]   

We can be reached by e-mail at sales@hotwatt.com When ordering catalogs please include your phone number and mailing address.