[HOME] [Stock List] [Salesman] [Technical Index]
| Ceramic Insulated Strip | Ceramic Insulated Finned Strip | Strip Special Features |
|
|
|
| Platens | Air Heating |
HEATERS FOR EVERY APPLICATION
PHONE: (978) 777-0070
Strip heaters: Mica Insulated
U.L. Recognized - E56973 C.S.A. Certified - 016386-0-000
Applications
Dies, cylinders, kettles, molds, process machines, platens, tanks, or
other applications where controlled heating is needed.
Features
Construction
| Width: 1" | 1 1/2" |
2" |
|||||||
| Overall Length |
Catalog Number |
Min. Watts |
Max. Watts |
Catalog Number |
Min. Watts |
Max. Watts |
Catalog Number |
Min. Watts |
Max. Watts |
| 4" | ST1-4 | 50 | 100 | ST1.5-4 | 50 | 155 | ST2-4 | 50 | 195 |
| 6" | ST1-6 | 50 | 155 | ST1.5-6 | 50 | 250 | ST2-6 | 50 | 315 |
| 8" | ST1-8 | 50 | 230 | ST1.5-8 | 50 | 340 | ST2-8 | 50 | 435 |
| 12" | ST1-12 | 50 | 345 | ST1.5-12 | 50 | 520 | ST2-12 | 50 | 675 |
| 18" | ST1-18 | 50 | 520 | ST1.5-18 | 50 | 790 | ST2-18 | 50 | 1035 |
| 24" | ST1-24 | 50 | 700 | ST1.5-24 | 50 | 1060 | ST2-24 | 50 | 1395 |
| Width: 2 1/2" | 3" |
4" |
|||||||
| Overall Length |
Catalog Number |
Min. Watts |
Max. Watts |
Catalog Number |
Min. Watts |
Max. Watts |
Catalog Number |
Min. Watts |
Max. Watts |
| 4" | ST2.5-4 | 50 | 215 | ST3-4 | 50 | 230 | ST4-4 | 50 | 300 |
| 6" | ST2.5-6 | 50 | 350 | ST3-6 | 50 | 400 | ST4-6 | 50 | 540 |
| 8" | ST2.5-8 | 50 | 515 | ST3-8 | 50 | 590 | ST4-8 | 50 | 780 |
| 12" | ST2.5-12 | 50 | 775 | ST3-12 | 50 | 940 | ST4-12 | 50 | 1250 |
| 18" | ST2.5-18 | 50 | 1250 | ST3-18 | 50 | 1480 | ST4-18 | 50 | 2000 |
| 24" | ST2.5-24 | 50 | 1700 | ST3-24 | 50 | 2000 | ST4-24 | 50 | 2700 |
Wattages
The above chart is based on a watt density of 30 watts per square inch of
surface.
The watt density should be varied, depending on operating temperature in accordance with the following table.
| Operating Temperature | Watts/square inch |
| 300°F | 40 |
| 400°F | 30 |
| 500°F | 21 |
| 600°F | 12 |
| 700°F - 900°F (Max.) | 10 |
To compute wattage, multiply length (less 1") x width x
watts per square inch based on above table.
On units with mounting holes, reduce length by an additional 2" when computing
wattage.
Voltage
Standard voltages are either 120V or 240V. Other voltages are available.
Tolerances
Width: ±.03"
Thickness: .187" nominal
Length: Up to 24", ±1/16"
24" to 48", ±1/8" Lengths over 48", consult factory.
Terminal Height: 3/4" nominal
Wattage tolerances are held to ±5%, -10% at rated voltage.
Mounting Holes
Units are supplied without mounting holes. 1/2" x 5/16" mounting
holes, one each end, may be supplied if specified.
Hole center is 1/2" from end. Terminals are 1 1/4" from end on types SSA, SSB,
and SO on units with mounting holes.
Other mounting hole sizes and locations are available. Consult factory.
How To Order
Specify: quantity, width, length, wattage, voltage, terminal arrangement,
mounting holes and cutouts if any. Detail cutouts,
and mounting holes (if any) on dimensional drawing.
Example: ST1.5-10/300W/120V/SSA/ standard mounting holes
Optional Terminations
Stainless Steel Post
Up to 2 1/4" wide: 6-32 x 1" maximum 5/8" on center
2 1/4" wide and wider: 8-32 x 1" maximum, 3/4" on center
| Type SSA: Parallel one end Available on: 1 1/2" and wider |
Type SSB: Tandem one end. Available on: 1 1/2" and wider |
|
|
|
|
| Type SC: Centered post terminals Available on: 1 1/2" and wider |
Type SO: Opposite ends Available on: 1" and wider |
|
|
|
|
High Temperature Insulated Leads |
|
| Type FS: Insulated leads at one end Available on: 1 1/2" and wider |
Type FO: Insulated leads at opposite ends Available on: 1" and wider |
|
|
[HOME] [Stock List] [Salesman] [Technical Index]
Strip Heaters: [Ceramic Insulated
Strip] [Ceramic
Ins.Finned Strip] [Strip Special Features]
 |
We can be reached by
e-mail at sales@hotwatt.com |
