AIR PROCESS HEATERS standard tee type 1 1/4"

Download PDF

Air Process Heaters: Tee Type – 1 1/4″ diameter

3/8″

1/2″

5/8″

3/4″

1 1/4″

Construction

Optional stainless steel bushing – 1 1/4″ NPT male fitting.
Fiberglass insulated leads.
Epoxy seal.
Copper tee.
Optional brass bushing – 1 1/4″ NPT male fitting.

Specifications

Maximum Amperage: 25
Cross Sectional Flow Area: .348 sq. in.
Maximum CFM: 50
CFM	Max.Watts/linear in. of heated length
1	200
2	200
4	200
6	200
8	200
10	250
15	375
20	500
25	625
30	750
35	875
40	1000
50	1250

Pressure Rating: 80 psig

Specifications Pressure Drop vs. Air Flow

Pressure Drop (psig)

Air Flow (SCFM)

Sizes

Diameter: 1 1/4""

Length	Heated Length	Cat. No.w/o fittings	Cat. No. w/male NPT fittings
4″	3 1/2″	AH1.2-4	AH1.2-4-MF
5″	4 1/2″	AH1.2-5	AH1.2-5-MF
6″	5 1/2″	AH1.2-6	AH1.2-6-MF
7″	6 1/2″	AH1.2-7	AH1.2-7-MF
8″	7 1/2″	AH1.2-8	AH1.2-8-MF
9″	8 1/2″	AH1.2-9	AH1.2-9-MF
10″	9 1/2″	AH1.2-10	AH1.2-10-MF
12″	11 1/2″	AH1.2-12	AH1.2-12-MF
14″	13 1/2″	AH1.2-14	AH1.2-14-MF

Special Features Available

MF: 1 1/4″ NPT male fittings (add MF to catalog number).
FF: 1/2″ NPT female fittings (add FF to catalog number).
HF: Hose adaptor on entry end only (add HF to catalog number and specify I.D. of hose).
SF-3: Alternate style – Post terminals.
SF-28: Three Phase
SF-29: Multiple Heat circuits – Specify wattages
SF-32: High voltage (above 250V – consult factory).